Mar 28, 2024  
2022-2023 Undergraduate Catalog 
    
2022-2023 Undergraduate Catalog [ARCHIVED CATALOG]

Industrial Engineering: Computing Emphasis Area, BS


Return to {$returnto_text} Return to: College of Engineering, Computing and Applied Sciences

Program Description


Industrial engineers design, install, and improve the complex systems that provide goods and services vital to our society and economy. These systems place unique demands for breadth of preparation on industrial engineers. The Industrial Engineering baccalaureate program prepares graduates to: (1) design, develop, implement, and improve integrated systems that include people, materials, information, equipment, and energy using appropriate analytical, computational and experimental practices; (2) apply information technologies to the practice of industrial engineering; (3) conduct themselves in a professional and ethical manner; and (4) work and communicate effectively with colleagues at every level in the organization.

The traditional arenas for the practice of industrial engineering are the manufacturing facilities of industry; however, many practicing industrial engineers are employed in non-manufacturing institutions such as hospitals, financial institutions, consulting firms and government agencies. In addition to numerous employment opportunities in professional practice, industrial engineering graduates may further their formal education. The Department of Industrial Engineering offers programs leading to the Master of Science and Doctor of Philosophy degrees.

The Department of Industrial Engineering also offers a combined Bachelor’s/Master’s plan in which accepted students may count up to 12 hours of graduate credit (approved 6000- and 8000-level courses) toward both a bachelor’s and a master’s degree, with the stipulation that a minimum of 150 credit hours must be earned. To be eligible, the student must have senior standing and a minimum overall grade-point average of 3.4. Most students completing the joint BS/MS program in IE can only double count nine units. Details of the suggested curriculum and program information are available from the Industrial Engineering Department.

Detailed curriculum and department information is available at https://www.clemson.edu/cecas/departments/ie/.

Industrial Engineering Change of Major Policy

To transfer into the Industrial Engineering BS program, students must have completed the following courses with a grade of C or better: CH 1010 , ENGL 1030 , ENGR 1020  (or both ENGR 1050  and ENGR 1060 ), ENGR 1410  (or ENGR 1070 , ENGR 1080  and ENGR 1090 ; or ENGR 1640 ; or CPSC 1010  or CPSC 1060  or CPSC 1110 ), MATH 1060  (or both MATH 1040  and MATH 1070 ), MATH 1080 , and PHYS 1220 .

Paperwork for students transferring from General Engineering is handled by their College of Engineering, Computing and Applied Sciences advisors. As long as a student has a minimum overall GPA of 2.0, and has completed the courses listed above with a grade of C or higher, the student’s change of major request will be processed.

Paperwork for students transferring from any other major is handled by the industrial engineering undergraduate program coordinator. A student must have a minimum overall GPA of 2.0, and have completed the courses listed above with a grade of C or higher. Additionally, non-General Engineering students are required to complete a plan of study that documents all courses to be taken until graduation. Click here for the Course Planning Guide.

Program Requirements


Freshman Year


First Semester


All General Engineering students take the same classes their first term, regardless of their intended major. Coursework in the second term varies. Students should consult with a General Engineering advisor to determine appropriate courses.

Credit Hours: 17


Second Semester


Credit Hours: 14

Sophomore Year


Junior Year


Credit Hours: 16

Second Semester


Credit Hours: 16

Senior Year


First Semester


Credit Hours: 16

Second Semester


  • 4 Credits
  •  

  • Arts and Humanities Requirement 3 Credits 4
  • or

  • Social Science Requirement 3 Credits 4
  •  

  • Broadening Requirement 3 Credits 11
  • Emphasis Area Requirement 4 Credits 1,7
  • Industrial Engineering Integrating Requirement 3 Credits 12
Credit Hours: 17

Total Credits: 128


Footnotes


1 This course must be passed with a C or better either to transfer into Industrial Engineering or to satisfy later course prerequisites.

2 The combination of ENGR 1050  and ENGR 1060  or the combination of ENGR 1510  and ENGR 1520  may be substituted for ENGR 1020 .

3 Depending on a student’s Clemson Mathematics Placement Test score, MATH 1040  and MATH 1070  may be substituted for MATH 1060 ; or the student may be required to take MATH 1050  before enrolling in MATH 1060 .

4 See General Education Requirements . Three General Education credits must also satisfy the South Carolina REACH Act R­equirement. See the South Carolina REACH Act Requirement in the Academic Regulations  section.

5 ENGR 1640  with a grade of C or higher; or the combination of ENGR 1070 , ENGR 1080  and ENGR 1090 , each with a grade of C or higher; or the combination of CHE 1300  plus one of CPSC 1010 , CPSC 1110  or CPSC 1610 , each with a grade of C or higher, will also satisfy this requirement.

6 PHYS 2230  may be substituted.

7 One of the following course sequences is required:

or

8 A total of nine credits selected from the following: CE 2010  or ME 2050 ; CE 2080  or ME 2060 ; ECE 2070 /ECE 2080  or ECE 2020 /ECE 2110 ; CE 3510  or MSE 2100 ; or one of CE 3410  or ME 2030  or MSE 3260 .

9 Select from BIOL 1030 /BIOL 1050 ; BIOL 1040 /BIOL 1060 ; BIOL 1100 ; BIOL 1220 /BIOL 1200 ; BIOL 1230 /BIOL 1200 ; CH 1020 ; GEOL 1010 /GEOL 1030 ; or GEOL 1120 /GEOL 1140 .

10 See General Education Requirements . COMM 1500  is recommended.

11 Select from ACCT 2010 , AGM 2050 , AMFG 3800 , AMFG 4200 , ARCH 4240 AS 3090 , AUE 4030 , AUE 4620 , BE 4400 , BIOE 4610 , BT 2200 , CE 2060 , CE 2550 , CE 3110 , CE 3310 , CE 4350 , CE 4400 CE 4530 , CE 4820 , CH 2010 , CH 2230 , CPSC 2920 , CPSC 4550 , CRP 4010 , CRP 4300 , CTE 1150 , ECE 1010 , EES 4140 , EES 4860 , ENGL 3140 , ENGR 2200 , ENGR 2210 , ENR 3120 , ENSP 1250 , GEOL 2700 , HIST 1010 , HLTH 4750 , HON 2070 , IE 4300 , IE 4460 , IE 4510 , IE 4520 , IE 4530 , IE 4560 , IE 4570 , IE 4580 , IE 4620 , IE 4640 , IE 4650 , IE 4700 , IE 4810 , IE 4850 , IE 4860 , IE 4870 , IE 4890 , IE 4910 LAW 3220 , MATH 2080 , MATH 3190 , MATH 4110 , MATH 4120 , MATH 4190 , MATH 4310 , MATH 4340 , MATH 4350 , MATH 4530 , MATH 4630 , ME 2070 , ME 3030 , ME 3100 , ME 4560 , ME 4620 , MGT 2010 , MGT 3070 , MGT 4110 , MKT 4210 , ML 3010 , both ML 4010  and ML 4020 , MSE 3100 , MSE 3190 , MSE 4160 , MSE 4530 , MSE 4570 , MSE 4580 , PHIL 1030 , PHIL 3440 , PHIL 3450 , PHIL 3460 POSC 1010 POSC 1030 , PSYC 3240 , PSYC 3350 , PSYC 3640 , PSYC 3680 , PSYC 3690 , PSYC 3770 , PSYC 4260 , PSYC 4560 , PSYC 4770 , STAT 4020 , SUST 2010 , or three credits of general education courses in any area other than Industrial Engineering.

12 Select from IE 4460 , IE 4560 , IE 4640 , IE 4650 , and IE 4890 . Students participating in the Combined Bachelor of Science/Master of Science program may use corresponding 6000-level courses through the appropriate processes.

NOTES:

  1. CH 1010 , ENGL 1030 , ENGR 1020  (or ENGR 1050  and ENGR 1060  or ENGR 1510  and ENGR 1520  if substituted for ENGR 1020 ), ENGR 1410  (or ENGR 1070 , ENGR 1080  and ENGR 1090  or ENGR 1640  or CPSC 1010  or CPSC 1060  or CPSC 1110 ), MATH 1060 , MATH 1080 , MATH 2060 , MATH 3110 , and PHYS 1220  must be passed with a grade of C or better.
  2. No student may exceed three attempts, including a W and academic forgiveness (with the exception of a withdrawal from the University), to successfully complete (with a grade of D or better) any of the following required IE courses: IE 2100 , IE 2140 , IE 3010 , IE 3600 , IE 3610 , IE 3800 , IE 3810 , IE 3840 , IE 3860 , IE 4400 , IE 4610 , IE 4670 , IE 4820 , and IE 4880 . Moreover, a third attempt is only granted by a written request to the department chair before the deadline to add a course in a subsequent term.
  3. Students participating in the Combined Bachelor of Science/Master of Science program may count a maximum of 12 credits towards the graduate program.
  4. Depending on a student’s math placement, they may be invited to take part in the General Engineering Learning Community where they complete the following courses: ENGR 1000 , ENGR 1010 , ENGR 1100 , ENGR 1110 , ENGR 1510 , ENGR 1520 , and ENGR 1640 . The combination of ENGR 1510  and ENGR 1520  may be substituted for ENGR 1020 . ENGR 1640  may be substituted for ENGR 1410 .
  5. A transfer course may not be used to satisfy the General Education Global Challenges Requirement. While a transfer course may fulfill other degree requirements, students must enroll in a Clemson course(s) on the Global Challenges list to fulfill the Global Challenges Requirement.

Return to {$returnto_text} Return to: College of Engineering, Computing and Applied Sciences