| |
Biosystems Engineering |
| |
-
BE 3700 - Practicum 1-3 Credits (1-3 Contact Hours)
Preplanned internship with an approved employer involved with biosystems engineering endeavors. A minimum 130 hours of supervised responsibility is required per credit hour. Evaluation is based on activity journal, written/oral report, and an evaluation from the supervisor. To be taken Pass/No Pass only. May be repeated for a maximum of three credits. Preq: Junior standing and consent of department.
|
| |
-
BE 3990 - Creative Inquiry in Biosystems Engineering III 1-3 Credits (1-3 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. To be taken Pass/No Pass only. May be taken twice for a maximum of six credits.
|
| |
-
BE 4000 - Biosystems Engineering Honors Thesis 3 Credits (6 Contact Hours)
Individual research projects are conducted under the supervision and guidance of a faculty member. Senior honors thesis is required. Preq or concurrent enrollment: BE 3010 .
|
| |
-
BE (PES) 4080 - Land Treatment of Wastewater and Sludges 3 Credits (3 Contact Hours)
Principles for designing environmentally acceptable land application systems using municipal and industrial wastewater and sludges are presented. Topics include land-limiting constituent analysis; soil-plant interactions; system equipment and design; system operation and management; public acceptance, social, and regulatory issues. Case studies and field trips are planned. May also be offered as PES 4080 . Preq: Senior standing.
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4100 - Biological Kinetics and Reactor Modeling 3 Credits (2 Contact Hours)
Fundamentals of microbial and biochemical kinetics used in analysis and design of biological systems. Topics include mathematical and computer modeling of biological kinetics and systems, estimating model coefficients, and development of microbial kinetic models as basis for batch and continuous reactor design. Preq: BE 2120 ; and CE 2080 with a C or better and MATH 2080 with a C or better. Coreq: BE 4101 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4101 - Biological Kinetics and Reactor Modeling Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4100 . Coreq: BE 4100 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4120 - Heat and Mass Transport in Biosystems Engineering 3 Credits (3 Contact Hours)
Fundamentals of heat and mass transport used in engineering design and analysis of biological systems; principles of steady state and transient energy and mass balances, including chemical and biological generation terms. Preq: BE 4100 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4140 - Biosystems Engineering Unit Operations 3 Credits (2 Contact Hours)
Applies the basic principles of statics, dynamics, and thermodynamics to design of mechanical and electrical systems supporting biological operations and processes. Preq: BE 3140 and ME 3100 . Coreq: BE 4141 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4141 - Biosystems Engineering Unit Operations Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4140 . Coreq: BE 4140 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4150 - Instrumentation and Control for Biosystems Engineers 3 Credits (2 Contact Hours)
Overview of modern instrumentation techniques and digital electronic components and subsystems to integrate them into digital data acquisition and control systems for biosystems. Laboratory use of equipment is emphasized. Topics include characteristics of instruments, signal conditioning, transducer theory and applications, programmable logic controllers, and digital data acquisition and control. Preq: ECE 2070 and ECE 2080 . Coreq: BE 4151 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4151 - Instrumentation and Control for Biosystems Engineers Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4150 . Coreq: BE 4150 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4170 - Applied Instrumentation and Control for Biosystems 2 Credits (1 Contact Hours)
Hardware and software implementation of digital data acquisition and control systems for application to agriculture, aquaculture, biotechnology, and other biosystems. Topics include digital electronic circuits and components, microcomputer architecture, interfacing, and programming. Preq: BE 4150 . Coreq: BE 4171 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4171 - Applied Instrumentation and Control for Biosystems Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4170 . Coreq: BE 4170 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4210 - Engineering Systems for Soil Water Management 3 Credits (2 Contact Hours)
Presents fundamentals of design related to drainage of lands, irrigation, and modification of the microenvironment for optimum productivity. Preq: CE 3410 or CHE 2300 or ME 3080 . Coreq: BE 4211 .
|
| |
-
BE 4211 - Engineering Systems for Soil Water Management Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4210 . Coreq: BE 4210 .
|
| |
-
BE 4220 - Hydrologic Modeling of Small Watersheds 3 Credits (3 Contact Hours)
Design of structures and development of best management practices for runoff, flood, and sediment control from rural and urban areas, including natural and disturbed watersheds. Topics include modeling of prismatic and non-prismatic channels, culverts, and detention/retention ponds. Preq: BE 3220 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4240 - Ecological Engineering 3 Credits (3 Contact Hours)
Focuses on engineering solutions to environmental and socioeconomic problems using ecological design principles. Explores ecosystem processes as they pertain to sustainable development, natural resource protection, food and energy production, waste management, and environmental restoration. Engineering fundamentals and ecological modeling are integral components of this course. Preq: CE 3410 or CHE 2300 or ME 3080 .
|
| |
|
| |
-
BE 4280 - Biochemical Engineering 3 Credits (3 Contact Hours)
Use of microorganisms and enzymes for the production of chemical feedstocks, single-cell protein, antibiotics, and other fermentation products. Topics include kinetics and energetics of microbial metabolism, design and analysis of reactors for microbial growth and enzyme-catalyzed reactions, and considerations of scale-up, mass transfer, and sterilization during reactor design. Preq or concurrent enrollment: BE 4100 or CHE 3300 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4350 - Applications in Biotechnology Engineering 3 Credits (2 Contact Hours)
Bioengineering principles applied to the expanding fields of agricultural biotechnology, ecotechnology, and biomedical technology. Specific applications include waste treatment and ecological engineering, bioreactor propagation of plant and animal cells and tissues, applied genomics and synthetic seed production, biosensors and biomonitoring, biological implants and materials biocompatibility. Preq: BE 4280 . Coreq: BE 4351 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4351 - Applications in Biotechnology Engineering Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4350 . Coreq: BE 4350 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4380 - Bioprocess Engineering Design 3 Credits (2 Contact Hours)
Design and analysis of systems for processing biological materials. Topics include biotechnology, thermodynamics, transport processes, and biological properties related to bioprocess design and computational simulation. Unit operations include basic bioreactor operation, bioseparations, and preservation techniques. Preq or concurrent enrollment: BE 4100 or CHE 3300 or EES 4020 . Coreq: BE 4381 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4381 - Bioprocess Engineering Design Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany BE 4380 . Coreq: BE 4380 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE (CE) 4400 - Sustainable Energy Engineering 3 Credits (2 Contact Hours)
Investigation into merging renewable energy resources, including detailed study of solar, wind, and bioenergy alternatives. Also includes principles, technologies, and performance evaluation of components for these technologies and an introduction to tidal, hydro, geothermal, and other energy; energy conservation; cogeneration; financial, economical, and other issues related to alternative energy sources. May also be offered as CE 4400 . Preq: ENGR 1020 with a C or better. Coreq: BE 4401 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE (CE) 4401 - Sustainable Energy Engineering Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany BE 4400 . May also be offered as CE 4401 . Coreq: BE 4400 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE (EES, FOR) 4510 - Newman Seminar and Lecture Series in Natural Resources Engineering 1 Credits (2 Contact Hours)
Topics dealing with development and protection of land, air, water, and related resources are covered by seminar with instructor and invited lecturers. Current environmental and/or resource conservation issues are addressed. Includes Honors sections. May also be offered as EES 4510 or FOR 4510 . Preq: Senior standing.
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4640 - Non-Point Source Management in Engineered Ecosystems 3 Credits (2 Contact Hours)
Fundamentals of non-point source pollution, including quantification of environmental impact and ecosystem management related to contaminants and nutrients and to planning and design of ecological systems. Preq: MICR 3050 and Senior standing in engineering. Coreq: BE 4641 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4641 - Non-Point Source Management in Engineered Ecosystems Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BE 4640 . Coreq: BE 4640 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4730 - Special Topics in Biosystems Engineering 1-3 Credits (1-3 Contact Hours)
Comprehensive study of special topics not covered in other courses. Emphasizes independent pursuit of detailed investigations. May be repeated for a maximum of six credits, but only if different topics are covered. Preq: Consent of instructor.
|
| |
-
BE 4740 - Biosystems Engineering Design Project Management 1 Credit (1 Contact Hour)
Study of biological systems design using hydrology principles, fluid mechanics, bioprocessing, heat/mass transfer, instrumentation, mechanical unit operations, and structural principles for project design, scheduling, and cost estimation. Topics also include engineering ethics, professional development, written and oral communication, and job skills. Senior portfolios are also developed. Preq: Senior standing in Biosystems Engineering.
|
| |
-
BE 4750 - Biosystems Engineering Capstone Design 3 Credits (6 Contact Hours)
Students apply engineering knowledge to develop solutions to open-ended biosystems engineering problems. Designs are evaluated by faculty and practicing engineers based on appropriate use of engineering principles, consideration of ecological, economic and societal impacts, and clear communication. A final presentation and report are required. Preq: CE 3410 with a C or higher; and BE 3220 , BE 4100 , BE 4120 , BE 4150 , and BE 4380 .
|
| |
-
BE (EES) 4840 - Municipal Solid Waste Management 3 Credits (3 Contact Hours)
Introduction to the problems, regulations, collection, handling, recycling, and disposal of municipal solid wastes in the urban and rural sectors. Emphasizes an integrated waste-management system with resource recovery, composting, incineration, landfill disposals, and their costs. May also be offered as EES 4840 . Preq: EES 2020 or EES 4010 .
This 4000-level course has a 6000-level counterpart. Students should refer to the Graduate Announcements for the 6000-level description and requirements.
|
| |
-
BE 4990 - Creative Inquiry in Biosystems Engineering IV 1-3 Credits (1-3 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. To be taken Pass/No Pass only. May be taken twice for a maximum of six credits.
|
Biosystems Technology |
| |
-
BT 2200 - Biosystems Technology I 3 Credits (2 Contact Hours)
Introduces fundamental and applied concepts used in bioprocessing for biofuels and other high value compounds. Topics include operation of batch and continuous flow bioreactors, microbial growth in anaerobic and aerobic environments, fermentation for biofuel production, and use of renewable energy in bioprocessing. Laboratory includes hands-on exercises, problem-solving/computer sessions and oral presentations. Preq: BIOL 1030 and BIOL 1050 and CH 1010 . Coreq: BT 2201 .
|
| |
-
BT 2201 - Biosystems Technology I Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BT 2200 . Coreq: BT 2200 .
|
| |
-
BT 2400 - Biosystems Technology II 3 Credits (2 Contact Hours)
Introduces basic unit operations used in bioprocessing for biofuels and other bioproducts. Covers operation and selection of pumps, heat exchangers, separation systems and sensors used in bioprocessing. Laboratory includes hands-on exercises, problem-solving/computer sessions, and oral presentations. Preq: BT 2200 . Coreq: BT 2401 .
|
| |
-
BT 2401 - Biosystems Technology II Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany BT 2400 . Coreq: BT 2400 .
|
Business |
| |
-
BUS 1010 - Business Foundations 1 Credits (1 Contact Hours)
Introduction to a variety of topics critical to student success, including an overview of Clemson business degrees, on-campus resources available to ensure success, academic advising, business ethics, internships, co-ops, study abroad programs, student organizations, ePortfolios, and Clemson history.
|
| |
-
BUS 2910 - Honors Seminar in International Business 1 Credits (1 Contact Hours)
Introduction to the International Business Honors Program presented through a discussion of thesis expectations, study abroad experiences, and seminars given by returning senior International Business Honors students. To be taken Pass/No Pass only. Preq: Membership in Calhoun Honors College.
|
| |
-
BUS 2990 - Creative Inquiry in Business 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. May be repeated for a maximum of four credits.
|
| |
-
BUS 3910 - International Business Honors Thesis Research 1 Credits (1 Contact Hours)
Students work with a Clemson advisor and an international advisor to develop a research topic for the senior thesis. Students work and conduct research while participating in an approved study abroad. To be taken Pass/No Pass only. Preq: BUS 2910 .
|
| |
-
BUS 3920 - International Business Honors Thesis Proposal 1 Credits (1 Contact Hours)
Students work with a Clemson advisor and an international advisor to complete a proposal for the senior thesis. Students work and conduct research while participating in an approved study abroad. To be taken Pass/No Pass only. Preq: BUS 3910 .
|
| |
-
BUS 3990 - Creative Inquiry in Business 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. May be repeated for a maximum of four credits.
|
| |
-
BUS 4910 - International Business Honors Thesis I 3 Credits (3 Contact Hours)
Students work with an advisor to conduct literature review and research on a senior thesis topic and prepare presentations and thesis drafts based on this work. Preq: BUS 3920 .
|
| |
-
BUS 4920 - International Business Honors Thesis II 3 Credits (3 Contact Hours)
Students work with an advisor to complete a senior thesis. They prepare and present a seminar on the topic for presentation to faculty and other International Business Honors students. Preq: BUS 4910 .
|
| |
-
BUS 4990 - Creative Inquiry in Business 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. May be repeated for a maximum of four credits.
|
Cardiovascular Technology |
| |
-
CVT 2250 - Ultrasound Physics 3 Credits (3 Contact Hours)
Explanation of the basic principles and characteristics associated with diagnostic ultrasound. Preq: CVT 2260 .
|
| |
-
CVT 2260 - Introduction to Cardiovascular Sonography 3 Credits (3 Contact Hours)
Introduces students to patient care, patient confidentiality, blood components, lymphatics, cardiovascular pharmacology, heart embryology, cardiovascular anatomy and physiology, standard sonography views, and Doppler/instrumentation. Preq or concurrent enrollment: BIOL 2220 .
|
| |
-
CVT 3250 - Echocardiography Principles 4 Credits (3 Contact Hours)
Study of two-dimensional, m-mode, Doppler echocardiography and left ventricular systolic function. Includes discussion of various pathologies, the resulting echocardiographic findings and treatments. Preq: CVT 2250 and CVT 2260 . Coreq: CVT 3251 .
|
| |
-
CVT 3251 - Echocardiography Principles Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CVT 3250 . Coreq: CVT 3250 .
|
| |
-
CVT 3260 - Echocardiography Methods 4 Credits (3 Contact Hours)
Study of two-dimensional, Doppler echocardiography and transesophageal echocardiography. Includes discussion of various pathologies, the resulting echocardiographic findings and treatments. Preq: CVT 3250 . Coreq: CVT 3261 .
|
| |
-
CVT 3261 - Echocardiography Methods Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CVT 3260 . Coreq: CVT 3260 .
|
| |
-
CVT 3350 - Vascular Sonography Principles 4 Credits (3 Contact Hours)
Study of two-dimensional, color Doppler, spectral Doppler and other testing modalities in peripheral and cerebrovascular disease. Includes discussion of various pathologies, the resulting sonographic findings and treatments. Preq: CVT 2260 . Coreq: CVT 3351 .
|
| |
-
CVT 3351 - Vascular Sonography Principles Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CVT 3350 . Coreq: CVT 3350 .
|
| |
-
CVT 3360 - Vascular Sonography Methods 4 Credits (3 Contact Hours)
Study of two-dimensional, color Doppler, spectral Doppler and other testing modalities in peripheral arterial, abdominal vascular and intracranial cerebrovascular disease. Includes discussion of various pathologies, the resulting sonographic findings and treatments. Preq: CVT 3350 . Coreq: CVT 3361 .
|
| |
-
CVT 3361 - Vascular Sonography Methods Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CVT 3360 . Coreq: CVT 3360 .
|
| |
-
CVT 4240 - CVS Field Experience I 3 Credits (18 Contact Hours)
Students complete 4400 hours of uninterrupted, supervised work in a clinical care setting. Under direct supervision of GHS registered sonographers, students are introduced to scanning protocols and techniques, instructed in principles, techniques and applications of multiple diagnostic modalities, including echocardiography, vascular duplex imaging, Doppler, and plethysmography. Preq: CVT 3260 and CVT 3360 .
|
| |
-
CVT 4250 - CVS Field Experience II 6 Credits (18 Contact Hours)
Intermediate level course expands on introductory skills learned in CVT 4240. Students apply scanning protocols and techniques, and improve their use of multiple diagnostic modalities, including echocardiography, vascular duplex imaging, Doppler, and plethysmorgraphy. Students become proficient with all aspects of paperwork and communications within the health care organization. Preq: CVT 4240 .
|
| |
-
CVT 4260 - CVS Field Experience III 6 Credits (18 Contact Hours)
In this advanced course, students complete 440 hours in a clinical setting under the supervision of registered sonographers. Students are tested in all aspects of fundamental principles, techniques and applications of multiple diagnostic modalities, including echocardiography, vascular duplex imaging, Doppler and plethysmography. Preq: CVT 4250 .
|
Career and Technology Education |
| |
-
CTE 1150 - Contemporary Technological Problems 3 Credits (3 Contact Hours)
Provides students with an understanding of the problems and contributions of technology. Examples are taken from historical accounts and from analyses of contemporary technological intervention both in industrialized and nonindustrialized countries.
|
| |
-
CTE 2210 - Exploring Technology 3 Credits (3 Contact Hours)
Covers a wide range of technological concepts along with familiar examples of how technology impacts our lives as individuals, a society, and a global community.
|
| |
-
CTE 3100 - Designing Creative Instruction 3 Credits (2 Contact Hours)
Provides preservice teachers with opportunities to develop skills in technological literacy, design, inquiry-based instruction, and problem solving using a variety of media, with emphasis on their applications in the elementary curriculum. Preq: Junior standing in Early Childhood or Elementary Education. Coreq: CTE 3101 .
|
| |
-
CTE 3101 - Designing Creative Instruction Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CTE 3100 . Coreq: CTE 3100 .
|
Career Center Internship Program |
| |
-
INT 1010 - Off-Campus Internship Part-Time 1 0 Credits (0 Contact Hours)
Students participate in a part-time off-campus internship.
|
| |
-
INT 1020 - Off-Campus Internship Part-Time 2 0 Credits (0 Contact Hours)
Students participate in a part-time off-campus internship.
|
| |
-
INT 1030 - Off-Campus Internship Part-Time 3 0 Credits (0 Contact Hours)
Students participate in a part-time off-campus internship.
|
| |
-
INT 1510 - UPIC Internship Part-Time 1 0 Credits (10 Contact Hours)
Students participate in a part-time University Professional Internship/Co-op Program.
|
| |
-
INT 1520 - UPIC Internship Part-Time 2 0 Credits (10 Contact Hours)
Students participate in a part-time University Professional Internship/Co-op Program.
|
| |
-
INT 1530 - UPIC Internship Part-Time 3 0 Credits (10 Contact Hours)
Students participate in a part-time University Professional Internship/Co-op Program.
|
| |
-
INT 1540 - UPIC Internship Part-Time 4 0 Credits (10 Contact Hours)
Students participate in a part-time University Professional Internship/Co-op Program.
|
| |
-
INT 2010 - Off-Campus Internship Full-Time I 0 Credits (0 Contact Hours)
Students participate in a full-time off-campus internship.
|
| |
-
INT 2020 - Off-Campus Internship Full-Time 2 0 Credits (0 Contact Hours)
Students participate in a full-time off-campus internship.
|
| |
-
INT 2030 - Off-Campus Internship Full-Time 3 0 Credits (0 Contact Hours)
Students participate in a full-time off-campus internship.
|
| |
-
INT 2510 - UPIC Internship Full-Time 1 0 Credits (20 Contact Hours)
Students participate in a full-time University Professional Internship/Co-op Program.
|
| |
-
INT 2520 - UPIC Internship Full-Time 2 0 Credits (20 Contact Hours)
Students participate in a full-time University Professional Internship/Co-op Program.
|
| |
-
INT 2530 - UPIC Internship Full-Time 3 0 Credits (20 Contact Hours)
Students participate in a full-time University Professional Internship/Co-op Program.
|
| |
-
INT 2540 - UPIC Internship Full-Time 4 0 Credits (20 Contact Hours)
Students participate in a full-time University Professional Internship/Co-op Program.
|
| |
-
INT 3010 - International Internship 3 Credits (15 Contact Hours)
This three-module course provides students with a pre-departure curriculum, an international internship experience, and a post internship reacclimation curriculum. All on-campus settings are designed to provide meaningful, intentional career development and cultural awareness development. The international part-time internship requires a minimum of 160 hours. All hours must be completed and approved by the course instructor by the end of the eight weeks.
|
Center for Career and Professional Development |
| |
-
CCPD 1400 - Professional Development 1 Credit (1 Contact Hour)
Professional development course for first year majors and transfer students in specific disciplines. Methods for communication, including oral, written and electronic formats, are covered as related to a career in the student’s chosen discipline.
|
| |
-
CCPD 1600 - New Clemson University Spectrum Program Student Seminar 3 Credits (3 Contact Hours)
This course for incoming students in the Clemson University Spectrum Program provides a basic introduction to college with an emphasis on personal safety, campus navigation and resources, and self-management. Students are encouraged to share their experiences so students can all learn from one another.
|
| |
-
CCPD 1610 - Skills for College Success 1 Credit (1 Contact Hour)
Provides an overview of the basic skills and knowledge students need to maximize their success in college. Many of these skills, such as organization, goal setting and time management, are essential for later career success as well.
|
| |
-
CCPD 1630 - Social Intelligence in the Workplace 1 Credit (1 Contact Hour)
Designed to be taken in conjunction with each Clemson University Spectrum Program student’s first on-campus internship. This course aids students in navigating the social aspects of work and troubleshooting real and mock workplace issues, and promotes the development of situational awareness in work settings. Students are encouraged to share their experiences so students can all learn from one another.
|
Chemical Engineering |
| |
-
CHE 1300 - Introduction to Chemical Engineering 3 Credits (3 Contact Hours)
Tools and methods for analyzing engineering problems with applications in chemical and biochemical processes, including development of process flow diagrams, numerical methods, graphing, and applied statistics. Problem-solving and computer skills are developed in the lecture and laboratory activities. Preq: CH 1010 with a C or better and either ENGR 1020 or ENGR 1060 with a C or better. Preq or concurrent enrollment: MATH 1060 or MATH 1070 ; and PHYS 1220 .
|
| |
-
CHE 1990 - Creative Inquiry in Chemical and Biomolecular Engineering 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. To be taken Pass/No Pass only. May be repeated for a maximum of eight credits. Preq: Consent of faculty member/mentor.
|
| |
-
CHE 2110 - Mass and Energy Balances 4 Credits (3 Contact Hours)
Introduction to fundamental concepts of chemical engineering, including mass and energy balances, PVT relationships for gases and vapors, and elementary phase equilibria; problem-solving and computer skills are developed in lab. Preq: CHE 1300 with a C or higher; and CH 1020 and MATH 1080 and PHYS 1220 . Coreq: CHE 2111 .
|
| |
-
CHE 2111 - Mass and Energy Balances Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CHE 2110 . Coreq: CHE 2110 .
|
| |
-
CHE 2200 - Chemical Engineering Thermodynamics I 3 Credits (3 Contact Hours)
Topics include first and second laws of thermodynamics, ideal gases, PVT properties of real fluids, energy balances with chemical reactions, and thermodynamic properties of real fluids. Preq: CHE 2110 and MATH 2060 .
|
| |
-
CHE 2300 - Fluids/Heat Transfer 4 Credits (3 Contact Hours)
General principles of chemical engineering and study of fluid flow, fluid transportation, and heat transmission. Special emphasis is placed on theory and its practical application to design. Preq: CHE 2110 . Preq or concurrent enrollment: CHE 2200 and MATH 2060 . Coreq: CHE 2301 .
|
| |
-
CHE 2301 - Fluids/Heat Transfer Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CHE 2300 . Coreq: CHE 2300 .
|
| |
-
CHE 2990 - Creative Inquiry in Chemical and Biomolecular Engineering 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. Projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. To be taken Pass/No Pass only. May be repeated for a maximum of eight credits. Preq: Consent of faculty member/mentor.
|
| |
-
CHE 3000 - Honors Seminar 1 Credits (1 Contact Hours)
Acquaints students enrolled in the Departmental Honors Program with current research issues in the profession. This assists the student in preparing a research proposal for the Senior Thesis. To be taken Pass/No Pass only. Preq: CHE 2200 and CHE 2300 ; and admission to departmental honors program.
|
| |
-
CHE 3070 - Unit Operations Laboratory I 3 Credits (2 Contact Hours)
Laboratory work in the unit operations of fluid flow, heat transfer, and evaporation. Stress is on the relation between theory and experimental results and the statistical interpretation of those results and on report preparation and presentation. Preq: CHE 2200 and CHE 2300 . Coreq: CHE 3071 .
|
| |
-
CHE 3071 - Unit Operations Laboratory I Laboratory 0 Credits (3 Contact Hours)
Non-credit laboratory to accompany CHE 3070 . Coreq: CHE 3070 .
|
| |
-
CHE 3190 - Engineering Materials 3 Credits (3 Contact Hours)
Introduction to the fundamental properties and behavior of engineering materials emphasizing polymers, metals, ceramics, and composite materials. Preq: CHE 2110 . Preq or concurrent enrollment: CH 2230 and CHE 2200 .
|
| |
-
CHE 3210 - Chemical Engineering Thermodynamics II 3 Credits (3 Contact Hours)
Continuation of CHE 2200. Topics include thermodynamics of power cycles and refrigeration/liquefaction, thermodynamic properties of homogeneous mixtures, phase equilibria, and chemical reaction equilibria. Preq: CHE 2200 and MATH 2080 .
|
| |
-
CHE 3300 - Mass Transfer and Separation Processes 4 Credits (3 Contact Hours)
Study of mass transport fundamentals and application of these fundamentals to separation technologies, with emphasis on gas absorption, stripping, distillation, and liquid-liquid extraction. Preq: CHE 2200 and CHE 2300 . Preq or concurrent enrollment: CHE 3210 . Coreq: CHE 3301 .
|
| |
-
CHE 3301 - Mass Transfer and Separation Processes Laboratory 0 Credits (2 Contact Hours)
Non-credit laboratory to accompany CHE 3300 . Coreq: CHE 3300 .
|
| |
-
CHE 3530 - Process Dynamics and Control 3 Credits (3 Contact Hours)
Mathematical analysis of the dynamic response of process systems. Basic automatic control theory and design of control systems for process applications. Preq: CHE 2300 and MATH 2080 . Preq or concurrent enrollment: CHE 3300 .
|
| |
-
CHE 3950 - Honors Research I 3 Credits (9 Contact Hours)
Individual research under the direction of a Chemical Engineering faculty member. Preq: CHE 3000 .
|
| |
-
CHE 3990 - Creative Inquiry in Chemical and Biomolecular Engineering 1-4 Credits (1-4 Contact Hours)
In consultation with and under the direction of a faculty member, students pursue scholarly activities individually or in teams. These creative inquiry projects may be interdisciplinary. Arrangements with mentors must be established prior to registration. May be repeated for a maximum of eight credits. Preq: Consent of faculty member/mentor.
|
| |
Page: 1 <- 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
| 13
… Forward 10 -> 41 |
Print this Page